Reset the monitor to Factory Settings. Refer to Factory Factory Settings section of this article for more information. This section contains information about common troubleshooting methods for your Dell SE2417HG Monitor.

If the monitor is working correctly, it detects that there is no signal and one of the following message ( Figure 2)appears. While in self-test mode, the power LED remains white. Make sure that the video cable connecting the monitor to the computer is connected properly and is secure.Change the input color format to PC RGB or YPbPr in the Color Settings On-Screen Display Menu (OSD). Press Button 1 or Button 2 to highlight Factory Reset option in the menu and press Button 3 to select.

Article Summary: This article helps you find information about your Dell SE2417HG Monitor like how to setup the monitor, how to use the monitor and some troubleshooting methods to resolve the most common monitor related issues. Change the color-setting mode in the Color Settings On-Screen Display Menu (OSD) to Graphics or Video, depending on the application. Swap the ends of the VGA or HDMI cable between the monitor and the computer. Ensure that the cable is seated properly. It is always essential to isolate the monitor while troubleshooting your computer for the following scenarios:Try a known-good power outlet. If you are using a surge protector, connect the monitor directly to the wall outlet.